Vruzend Battery Finishing Kit with 160mm Heat Shrink 12AWG Silicone Cable

The Vruzend add-on kit is everything you will need to finish off your Vruzend battery. To start you needed one or more Vruzend kits, 18650 cells and a BMS (battery management system), and now to finish you need all the parts we supply here. This handy kit includes:

 

  • ½ a metre length, 5mm thick foam padding to wrap and insulate your battery
  • ½ a metre length of blue heat shrink wrap
  • 25mm Kapton tape heat to hold everything in place
  • 1 metre red and 1 metre black soft silicone encased pure copper cable
  • 2x pure copper connectors (30 amp) to connect main cables to your battery
  • 2x pairs of XT90 (90 amp) connectors for charging and discharging
  • 1x blue and 14x red crimp ring terminals to connect your bms wires
  • 2x pairs in three sizes of solder connectors
  • 127-piece cable heat shrink pack in 7 handy sizes

We have found this to be exactly what you need to neatly and efficiently finish off a great DIY battery project.

Look at the components of this kit once again:

Half a metre length, 5mm thickness foam padding to wrap and insulate your battery

 

 Half a metre length of blue heat shrink wrap

 

 25mm Kapton tape heat to hold everything together

 

 1 metre red, 1 metre black soft silicone encased pure copper cable

 

 2x pure copper connectors (30 amp) to connect main cables to your battery

 2x pairs of XT90 (90 amp) connectors for charging and discharging

1x blue and 14x red crimp ring terminals to connect your bms wires

 

 2x pairs in three sizes of solder connectors

 

 127-piece cable heat shrink pack in 7 handy sizes

 

 

Subscribe