We ship your order rapidly. Coronavirus is causing delays at courier companies however and your item may take three times longer. Please have patience.

4S 12V 60A 18650 Waterproof BMS For Rechargeable Lifepo4 Battery With Same Port

Product Description:

Product Name
LiFepo4 4S 12V 60A BMS
Material
FR-4
Function
over-charge protection;over-discharge protection;over-current protection;Short circuit protection;balance function;Offline protection;waterproof
Package
Bubble bag+Outer carton
Our Massive Stock
3 years of warranty
Lifetime after service
Fast delivery within 1-3days
Customized logo requirements acceptable
24hours quick response


Daly 18650 BMS 4S 12V 60A Waterproof BMS For Rechargeable Lifepo4 Battery With Same Port for lithium battery

1.Use top quality (A-level) protective integrated circuit IC, from the solution of Seiko of Japan.
2.Strong load ability, constant discharge current 60A use high voltage resistance, low inner resistance power Mosfet. The heat sink will greatly help cooling.
3.IC itself has power balancing function. The circuit is simple and reliable.
4.Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection function is very reliable.Long time short circuit of the load won’t affect the PCB and the battery.Temperature protection during
charging and discharging.

Details Images:

Outstanding because of the details


Special attention : the bms is sealed in one piece to achieve the waterproof and dustproof function of life to improve the stability and service life which is the unique market advantage of our company's products.Special attention : the bms is sealed in one piece to achieve the waterproof and dustproof function of life to improve the stability and service life which is the unique market advantage of our company's products.




The back of the BMS adopts the insulating glue instead of the traditional highland barley paper scheme, which will not wear and is more better to the fixed installation.The back of the BMS adopts the insulating glue instead of the traditional highland barley paper scheme, which will not wear and is more better to the fixed installation.

Lead out the output line, which is more convenient for the user to weld, and can effectively avoid the circuit damage caused by the high temperature of the electric soldering iron and the direct application of the tin line in the PCB boardLead out the output line, which is more convenient for the user to weld, and can effectively avoid the circuit damage caused by the high temperature of the electric soldering iron and the direct application of the tin line in the PCB board.

Product usage introduction:

First, the black line is connected to the total negative pole of the battery, then the first red line next to the black line is connected to the positive pole of the first series of the battery pack, and then the next red line is connected to the positive pole of the second series of the battery pack,then the next red wire connect with the related positive pole of the battery pack in this way. Measure the terminals of the connect row wire through the multimeter to ensure that the acquisition voltage is the
voltage corresponding to each series of the battery pack. Then plug in the BMS again, connect the b-wire to the total negative
pole of the battery pack, and connect the p-wire to the negative pole of the charge and discharge. Note: do not plug in the BMS
when connecting the row wire cable.

Subscribe