We ship your order rapidly. Coronavirus is causing delays at courier companies however and your item may take three times longer. Please have patience.

16S 60A 60V BMS Lithium-ion Li-ion Battery Protection Board Balance UK Stocks

UK Seller. UK Stock
Rapid dispatch within 1 working day to UK, EU and rest of World
DISCLAIMER: This item is a sophisticated electronic controller. You will need skill and knowledge to install it and use it. You will need to have done research, some available on YouTube - search "eBike School" and "Jehu Garcia" by example to find out what a bms is, what it does and especially how to install it. Wiring diagrams and how to use the bms are found on this listing. It will not be possible to return this item once opened and used, but most especially due to use or damge caused by negligence or lack of knowledge.

3.7V Li-ion16S 60V 60A 18650 PCM battery protection board BMS PCM with balanced lithium-ion lithium battery module

Model: DL16S (3.7V rated Li-ION Battery. Not for 3.2V Rated LiFePO4)

common Version : common port for charge/discharge 

Overview

◆DL16S60V15A/20/30A/40A/50A/60A bms is used for 16series 60V battery pack.

◆We can design it for various lithium batteries like LiFepo4, LiMn2O4, and Li-polymer etc.

◆The main functions are: over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection etc.

◆According to the customer request we can develop PCM in different sizes and structures.

◆BMS manufactured by  high quality Mos and IC imported . Keep your battery long cycle serivce life time.

2. Advantage

◆Use top quality (A-level) protective integrated circuit IC, from the solution of Seiko of Japan.

◆Strong load ability, constant discharge current 15A/20A/30/40A/50A/60A , use high voltage resistance, low inner resistance power Mosfet. The heat sink will greatly help cooling.

◆IC itself has power balancing function. The circuit is simple and reliable.

◆Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection function is very reliable.Long time short circuit of the load won’t affect the PCB and the battery.Temperature protection during charging and discharging.

◆Extreme low power consumption. The consumption of the whole device is less than 50uA.

◆PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating.

Parameters for li-ion 16S 48V BMS
  Description Specification Unite Remarks
20A 30A 40A 60A
Discharge continue discharge current 20 30 40 60 A  
Discharge Peak current 65 165 165 200 A  
Over current protection  65 165 165 200 A  
Charge Charge voltage 68 V  
Charge current 10 20 30 50 A Charge current 8A in separate port
Over charge protection Over charge detect voltage 4.25±0.025 V  
Over charge protection delay 0.5 S  
Over charge release voltage 4.15±0.05 V  
Balance Balance detection voltage 4.18 V  
Balance release voltage 4.18 V  
Balance current 30 mA Balance current30±5mA
Discharge protection Over discharge detect voltage 2.7±0.05 V  
Over discharge detect delay 0.5 S  
Over discharge release voltage 3.0±0.05 V  
Over current protection Over current detect voltage 150 mV  
Over current detect delay 9 MS  
Over current protection release conditions Off load    
Short circuit protection Short circuit protection conditions short circuit with extermal load    
Short circuit detection delay 250 uS  
Short circuit protection release conditions Off load    
Temp Protection Temp Protection NA As Requirement
Inner resistance Main circuit conductive inner resistance ≤10  
Self electricity consume Working current ≤40 uA  
Sleeping current(Battery in overdischarge) ≤20 uA  
Working Temp Temp range  -30to80
 

1_011_02

1_061_071_08

三元16串小电流详情页_07三元16串小电流详情页_08

_07

 

Subscribe